Arlon DPF 4600LX Outdoor & Fleet Vinyl Gang Sheet

Custom Printed Arlon DPF 4600LX Vinyl — 52 in Wide

Step up to a more durable, outdoor-ready vinyl built for commercial graphics that need to work harder and last longer. Your artwork is printed in-house on Arlon DPF 4600GLX at 52 inches wide by the length you select, making this middle-tier film an excellent choice for fleet decals, trailer graphics, partial vehicle wraps, wall graphics, windows, panels, and medium-term signage.

Choose Your Finish

• Unlaminated: Printed directly on gloss Arlon DPF 4600GLX. Choose this for protected installations, short-to-medium projects, or jobs where you will apply your own approved overlaminate.
• Gloss Laminate: Finished with Arlon Series 3220 gloss cast overlaminate for a bright finish, added UV resistance, and stronger abrasion and handling protection.
• Matte Laminate: Finished with Arlon Series 3220 matte cast overlaminate for a smooth, low-glare finish with added UV, abrasion, and handling protection.

Arlon lists Series 3220 as an approved overlaminate for DPF 4600LX. Printed eco-solvent graphics are allowed to outgas as needed before cold lamination; Arlon recommends 24–48 hours of drying before laminating.

Built for Outdoor, Fleet, and Commercial Graphics

DPF 4600LX is the middle level between promotional vinyl and a premium cast wrap film. It offers more outdoor durability and installation flexibility than entry-level calendered media while remaining a cost-conscious choice for flat panels and simple-to-moderate curves.

• Fleet and vehicle decals
• Flat vehicle sides and partial wraps
• Box trucks, vans, work vehicles, and smooth trailer panels
• Interior and exterior wall graphics on suitable smooth surfaces
• Window graphics and general commercial signage
• Real-estate signs, POP displays, trade-show graphics, and equipment branding

Low-Profile X-Scape Air Release

The lay-flat liner uses Arlon's low-profile X-Scape air-egress technology to help trapped air escape during installation. This makes positioning easier, reduces bubbles, and leaves a smoother, more paint-like printed surface with less visible air-channel texture. The light-gray adhesive is repositionable during installation and helps provide opacity over existing graphics or darker substrates.

Two Ways to Submit Artwork

1. Use the Gang Sheet Builder — print only: Arrange and duplicate artwork inside the 52-inch-wide sheet area. Use the builder when you want to maximize the purchased area and do not need contour cut lines.
2. Upload a cut-ready file — print and kiss cut: For contour cutting, upload an AI, EPS, or PDF containing a true vector stroke positioned exactly where the plotter should cut. Do not use the builder for orders that require cut lines. Kiss cutting is available on sheets up to 8 linear feet long.

Cutting Service

We can kiss cut as many graphics as fit within an eligible sheet. A kiss cut passes through the printed vinyl while leaving the backing liner intact, making the product ideal for grouped fleet decals, equipment labels, and large sticker sheets.

• Vector contour paths are required for kiss cutting.
• Raster, flattened, or image-only cut lines cannot be used by the plotter.
• We do not perf cut through the backing liner.
• We do not weed excess vinyl.
• We do not apply transfer tape or masking.
• Individual decals are not separated from the sheet.

About Arlon DPF 4600LX

• 3.2-mil high-performance calendered digital print film
• Clean-removing, repositionable light-gray adhesive
• Lay-flat polycoated liner with low-profile X-Scape air-egress technology
• Designed for simple-to-moderate curves and multipurpose commercial graphics
• Compatible with eco-solvent, solvent, latex, and UV printing
• Rated by Arlon for up to 7 years of outdoor durability when unprinted
• Manufacturer application temperature range: 60°F to 80°F on a clean, dry substrate
• Manufacturer service temperature range: -20°F to 150°F after proper application

Printed service life varies with ink system, lamination, color, orientation, exposure, maintenance, surface preparation, and installation. Vertical and upper-outboard applications weather better than horizontal surfaces such as roofs and hoods. Test painted walls and unfamiliar substrates before full installation.

Artwork Checklist

• Build artwork at final size and keep every element inside the purchased sheet area.
• Use high-resolution artwork for clean output.
• For contour cutting, upload AI, EPS, or PDF with a vector stroke at the exact finished cut path.
• Do not flatten or rasterize the cut path.
• Outline fonts and embed linked artwork before uploading.
• Review size, spelling, color, orientation, and cut-path placement before submitting.

Production scope: We provide printing, the selected Series 3220 lamination finish, and kiss cutting on sheets up to 8 linear feet when a valid vector cut path is supplied. Design correction, weeding, transfer masking, perf cutting, individual trimming, and installation are not included. Finished orders are rolled into a tube. Local pickup only; shipping is not available for this product.

Application and finish images are illustrative examples. Final appearance and service life depend on the customer's artwork, finish selection, ink coverage, exposure, surface, and installation.